SETUP
rmo2012-001-002_a
A. 10 m (33 ft)
90°
rmo2008-027-103_a
Trace 2 lines parallel to the ground on the test sur-
face as follows:
LINES ON THE TEST SURFACE
Line 2
700 mm (27-1/2 in) above ground
Line 3
610 mm (24 in) above ground
Select low beam.
Beam aiming is correct when the focus point
(brightest spot) of headlight reflection is between
marks.
2
3
1
rmo2008-027-101_a
TYPICAL - HEADLIGHT REFLECTION ON TEST SURFACE
1. Focus point
2. 700 mm (27-1/2 in) above ground
3. 610 mm (24 in) above ground
Each headlight can be adjusted by turning the ad-
justment screws located in the front of the lower
console with a Phillips screwdriver. Adjust both
headlights evenly.
rmr2008-027-102_a
ADJUSTMENT SCREWS
European Models
Position the vehicle 10 m (33 ft) in front of a test
surface as shown.
Have a person of at least 91 kg (200 lb) taking
place on the driver's seat.
rmo2012-001-002_a
A. 91 kg (200 lb)
90°
rmo2008-027-103_a
Trace 4 lines parallel to the ground on the test sur-
face as follows:
LINES ON THE TEST SURFACE
Line A
828 mm (32-19/32 in) above ground
Line B
738 mm (29-1/16 in) above ground
Line C
464 mm (18-9/32 in) above ground
Line D
374 mm (14-23/32 in) above ground
Select high beam.
Beam aiming is correct when the focus point (cen-
ter point of ellipse) of headlight reflection is be-
tween upper marks.
PREDELIVERY
2014-2
31 / 39
