SETUP
Cluster Units and Clock Setting (Base Model)
Pressing the SET button on the RECC to scroll through the different functions.
MAIN DISPLAY FUNCTIONS
Function sequence
INFORMATION DISPLAYED
Outside temperature
XX °C (Celsius)
XX °F (Fahrenheit)
Tachometer (revolutions per minutes)
XXXX RPM
Pressing the MODE button on the RECC will scroll through the different functions.
SECONDARY DISPLAY FUNCTIONS
Function sequence
INFORMATION DISPLAYED
Clock
XX:XX (24:00 time base)
XX:XX A or P (12:00 AM/PM time base)
Cumulative distance odometer
XXXXX.X Km or mi
Trip distance — odometer A (TRIP A)
XXXXX.X Km or mi
Trip distance — odometer B (TRIP B)
XXXXX.X Km or mi
Trip time chronometer (HrTRIP)
XXXXX.X
Engine time chronometer (Hr)
XXXXX.X
Date (Month - Day)
XX-XX Month and Day
Setting Metric/Imperial Units
1. Push and hold SET button on the RECC for three seconds.
2. Push _down arrow_ to select KM, push up arrow to select MI.
Setting the Clock
1. Press MODE button to select clock display.
2. Push and hold MODE button for three seconds.
3. Press down arrow to select 12:00 AM PM or up arrow to select 24:00 time base.
4. If 12:00 AM PM time base is selected, AM PM is displayed in upper LCD.Press up or down arrow to
select A (AM) or P (PM).
5. Press on the right arrow to display Hr in upper LCD. The hour number flashes in the lower LCD. Press
up or down arrow to select the applicable hour value.
6. Press on the right arrow to display Min in upper LCD. The minute number flashes in the lower LCD.
Press up or down arrow to select the applicable minute value.
7. When completed, press the right arrow to exit the menu.
NOTE:
You can always return to previous selection using the left arrow.
PREDELIVERY
2014-2
35 / 39
