BRP can-am COMMANDER 1000 2017, Руководство оператора

Страница: 83 / 155

BASIC PROCEDURES
Starting the Engine
Insert key in ignition switch and turn to
the ON with lights position.
Press the brake pedal.
NOTE: If shift lever is not set to PARK
(P), the brake pedal must be pressed to
allow engine starting.
Press the engine start button and hold
until the engine starts.
NOTE: Do not press the accelera-
tor pedal. If the accelerator pedal is
pressed at least 20%, the engine will
not start.
Release the engine start button imme-
diately when the engine has started.
NOTICE
If engine does not start
after a few seconds, do not hold the
engine start button more than 10
seconds. Refer to
TROUBLESHOOT-
ING
section.
Shifting the Transmission
Apply brakes and select the desired
shift lever position.
Release brakes.
NOTICE
When changing gear se-
lection, always completely stop the
vehicle and apply the brakes prior to
shifting.
Choosing the Correct
Range (Low or High)
It is important to limit situations known
to make the drive belt slip excessively.
The main reason the drive belt will slip
is if the gearbox is in high rangewhen it
should be in low range.
Pay attention to the following:
Low range
Low range should be used whenever:
– Pulling
– Pushing
– Hauling a load
– 4x4 applications
– Mud holes
– Water holes
– Crossing obstacles
– Climbing onto trailer
– Hill climbing
It is also recommended to use low
range if driving for prolonged periods
at speeds under 24 km/h (15 MPH)
Please refer to BREAK-IN PERIOD
sub-
section in this guide for information in
regards to belt break-in period.
High range
High is the default riding range.
Electronic Drive Belt Protection
(if available and activated on your
model)
Some vehicles have the electronic
drive belt protection function acti-
vated.
Refer to your authorized Can-Am
dealer for availability and possible acti-
vation.
This function is activated when riding
at too slow speed for the
high range ,
such as in the following situations:
– Pulling
– Pushing
– Hauling a load
– 4x4 applications
– Mud holes
– Water holes
– Crossing obstacles
– Climbing onto trailer
– Hill climbing
In the above mentioned situations the
electronic drive belt protection will
help protect the CVT drive belt from
being damaged by activating the en-
gine torque limiter. The gauge will also
scroll a
LOW GEAR message, sug-
gesting the operator to immobilize the
vehicle and set to LOW GEAR.
_______________
81