BRP can-am COMMANDER 1000 2017, Руководство оператора

Страница: 55 / 155

SECONDARY CONTROLS
WARNING
Only use the override to help get
the vehicle unstuck from mud or
other soft terrain. Do not use the
override for normal operation in
reverse. This would allow driving
in reverse at excessive speeds and
can increase the risk of losing con-
trol.
2. To temporarily deactivate the elec-
tronic drive belt protection (if avail-
able and activated on your model).
WARNING
Only use the override if it is not
possible to shift in LOW range. Do
not use the override for normal
operation and always be aware of
your surroundings when using the
override.
3. To erase the MAINTENANCE RE-
QUIRED message, refer to
MES-
SAGE DISPLAY MODE
or
MULTI-
FUNCTION DISPLAY
subsection.
4. To move vehicle in case of a pedal
accelerator failure, refer to
TROU-
BLESHOOTING GUIDELINES
sub-
section.
To engage the override function, pro-
ceed as follows:
1. Press and hold the override switch
then press the accelerator pedal
gradually.
NOTE: While in REVERSE and using
the override function, the gauge will
scroll an
OVERRIDE message to con-
firm that the function is activated.
2. To disengage the override function,
simply release the override switch.
9) DPS Switch (Models
with DPS)
The DPS switch is used to change the
DPS (Dynamic Power Steering) mode.
To change mode, DPS switch needs to
be held for at least 2 seconds. If held
for less than 2 seconds, it will show the
selected mode.
tmo2014-002-004_g
1. DPS switch
_______________
53