Brother Stampcreator PRO SC2000USB Скачать руководство пользователя страница 55

Страница: 55 / 63

DESIGINING A STAMP

CARE & TROUBLESHOOTING

SOLUTION

• Close the ink ribbon compartment cover.

• Install the ink ribbon cassette.
• Replace the ink ribbon cassette.

• Install the xenon lamp unit.

• Replace the xenon lamp unit.

• Insert an ID label sheet into the ID label slot.

• Correctly insert the specified draft sheet or ID label sheet into the ID label slot.

• Remove the draft sheet or ID label sheet from the ID label slot, or pull out

the draft sheet magazine tray and remove the draft sheet.

• Open the ink ribbon compartment cover, and then remove the draft sheet

or ID label sheet.

• Open the ink ribbon compartment cover, remove the xenon lamp unit, and

then remove the draft sheet or ID label sheet.

• Insert a stamp that is the correct size.

• Re-insert the stamp.

• Check the interface cable connections.
• For Serial connection only, check the COM port settings on the PC.

Bits per second : 115200
Data bits : 8
Parity : None
Stop bits : 1
Flow Control : Hardware

• Contact your service representative.

• Check the interface cable connections.
• Contact your service representative.

• Contact your service representative.

• Replace the xenon lamp unit.
• Contact your service representative.

• Contact your service representative.

• Load draft sheets into the draft sheet magazine tray, and then insert the

draft sheet magazine tray into the draft sheet magazine tray slot.

• Clean the draft sheet rollers using a cleaning sheet.
• Contact your service representative.

• Turn off the machine, and wait for one minute before turning on the ma-

chine and trying to print again.

MESSAGE

CLOSE COVER !

CHECK RIBBON !

INSTALL Xe UNIT

REPLACE Xe UNIT

INSERT LABEL !

CHANGE LABEL !

REMOVE LABEL 1

REMOVE LABEL 2

REMOVE LABEL 3

CHANGE STAMP !

RESET STAMP !

I/F ERROR !

CACHE FULL !

SRAM DEFECT !

HEAD ERROR !

Xe UNIT ERROR !

SIZE PCB ERROR!

CHECK TRAY !

CHARGE ERROR !

Error message list

Содержание Stampcreator PRO SC2000USB
































































Результаты поиска

Содержание Stampcreator PRO SC2000USB

Отзывы:

Похожие инструкции для Stampcreator PRO SC2000USB

Бренды по названию

Популярные бренды

Brother Stampcreator PRO SC2000USB, Руководство по эксплуатации

Результаты поиска

Содержание Stampcreator PRO SC2000USB

Отзывы:

Похожие инструкции для Stampcreator PRO SC2000USB

Бренды по названию

Популярные бренды