Brother HL-6050DN Скачать руководство пользователя страница 41

Страница: 41 / 308

HL-6050/6050D/6050DN SERVICE MANUAL

2-9

4.2

Panel Switches Functions

You can control the basic printer operations and change various printer settings with 7 buttons
(

Go, Job Cancel, Reprint, +, -, Set, Back

Key Function

Exit from the control panel menu, reprint settings and error messages.

Pause / Continue printing.

Job Cancel

Stop and cancel the printer job in progress.

Reprint

Select the number of extra copies. (1-999)

Move forward and backward through menus.

Move forward and backward through the available options.

Set

Select the control panel menu.

Set the selected menus and settings.

Back

Go back one level in the menu.

4.2.1 Go

button

The panel indications can be changed from the current status (MENU, ERROR and REPRINT
settings) by pressing the

button once. For ERROR indications, the control panel changes

when the error is cleared.

You can pause printing with the

button. Pressing the

button again restarts the print job

and clears the pause. During a pause, the printer is in the off-line.

NOTE:
If the printer is in pause mode and you do not want to print the data that is left, you can cancel
the job by pressing

Job Cancel

button. Once the job has been cancelled the printer will return

to the READY state.

4.2.2 Job Cancel button

You can cancel the processing or printing of data with the

Job Cancel

button. The display

shows “

JOB CANCELLING

” until the job is cancelled. After canceling the job, the printer

returns to the “

READY

” state. When the printer is not receiving data or printing, the display

shows “

NO DATA!!!

” and you cannot cancel the job.

Содержание HL-6050DN





















































































































































































































































































































Результаты поиска

Содержание HL-6050DN

Отзывы:

Похожие инструкции для HL-6050DN

Бренды по названию

Популярные бренды

Brother HL-6050DN, Руководство по обслуживанию

Результаты поиска

Содержание HL-6050DN

Отзывы:

Похожие инструкции для HL-6050DN

Бренды по названию

Популярные бренды