Brother HE-800B, Руководство по обслуживанию

Страница: 82 / 178

6. ASSEMBLY
HE-800B
73
G
1
）
Pass the wick (31) through the collar (30), and then insert it into the oil terminal (32). Push the wick (31) firmly enough
into the groove as shown in the illustration.
2
）
Insert the packing (33) into the oil terminal (32), and then install the oil cap (34).
3
）
Pass the wick (31) through the oil pipe B (35), and then install it to the oil terminal (32).
4
）
Push the oil tube (10) that is connected between the oil terminal and the plunger pump into the oil terminal (32).
5
）
Push the oil tube (4) that is connected between the oil terminal and the oil outlet into the oil terminal (32).
6
）
Install the tube support (36) to the wick base support (38) with the screw (37).
7
）
Attach the oil tube (4) to the tube support (36), and then install the oil terminal (32) to the wick base support (38) with the
two screws (39).
8
）
Pass the wick (40) of the needle bar bracket, the two wicks of the bush F, and the wick 41 coming from the thread
take-up support shaft through the oil tubes (42) and (43), and then install the wick base A (44) to the wick base support
(38) with the screw (45).
9
）
Install the oil tube (24) for lubricating the bush M and the zigzag lever shaft and the oil tube (23) for lubricating the
zigzag mechanism to the wick base support (38) with the fastening band (46).
10
）
Install the wick base support (38) with the two screws (47).
11
）
Insert the felt (48), and then install the cap (49) with the screw (50).
Push into the groove
0704D
0705D 0703D
0706D