Brother HE-800B, Руководство по обслуживанию

Страница: 18 / 178

HE-800B
3. FUNCTION SETTINGS
9
No. Setting items Setting range Default value
055
Work clamp operation after automatic sewing is finished.
OFF: Work clamp remains lowered after automatic sewing is finished.
To raise the work clamp, carry out the following operations.
(A) For treadle: Depress the treadle backward.
(B) For triple pedal: Press the work clamp lifter switch.
ON: Work clamp remains raised after automatic sewing is finished.
ON/OFF ON
060
Work clamp lifting speed.
-: Lifting speed becomes slower.
+: Lifting speed becomes faster.
-4 to 4 0
061
Work clamp lowering speed.
-: Dropping speed becomes slower.
+: Dropping speed becomes faster.
-4 to 4 0
062
Thread trimming speed.
-: Thread trimming speed becomes slower.
+: Thread trimming speed becomes faster.
-4 to 4 0
Sewing machine motor settings (100 to 199)
No. Setting items Setting range Default value
150
Automatic needle lifter operation ON/OFF.
OFF: If the pulley is at the needle up stop position during needle bar and work
clamp home position detection, a needle up error will be generated.
ON: If the pulley is not at the needle up stop position during needle bar and
work clamp home position detection, it will move automatically to the
needle up stop position, and then home position detection will be carried
out.
ON/OFF ON
151
Needle up stop position correction.
Setting can be carried out in units of 1°.
-: Stopping position becomes earlier.
+: Stopping position becomes later.
-7 to 7 0