Brother DCP-9045CDN Скачать руководство пользователя страница 346

Страница: 346 / 491

Confidential

4-2

<Procedures>

Rewriting the Firmware (Main Firmware, Sub Firmware (PCL/PS))

- How to rewrite the firmware by using the USB flash memory drive

If you save program files in the USB flash memory drive and plug it into the USB direct
Interface, you can rewrite the firmware and set the country.

Note:

- Make sure that the USB flash memory drive has enough space to save the program file.

- In order to verify the data list saved in the USB memory, press the

▲

▼

button after the

message described in Step (4) appears on the LCD, and check the list shown on the LCD.

(1) Save the necessary program files (such as Main firmware (djf file) and Sub firmware

(PCL/PS) (djf file)) to rewrite them into the USB flash memory drive.

(2) Connect the USB flash memory drive to the USB direct interface on the front of the

machine.

Fig. 4-1

(3) When the machine has recognized the USB flash memory drive, the

Direct

button lights

blue. Press the

Direct

button.

(4) “Direct Print” is displayed on the first line of the LCD, and the file names will be shown

on the second or lower line of the LCD. Press the or button to choose the
necessary program file, and press the

button.

(5) When “Program Update/ Press Start” appears on the LCD, press the

button to start.

The “Program Updating/ Do not turn OFF” message appears on the LCD with Status
LED on while rewriting the firmware. Do not turn off the machine.

(6) After completion of firmware rewriting, the machine is rebooted and returns to the

Ready state automatically.

(7) If selecting the necessary program file to rewrite next, press the

Direct

button again and

then follow the steps from (4) to (6).

Note:

It is recommended to rewrite 1) Sub firmware (PCL/PS) and 2) Main firmware. In this
order.

Содержание DCP-9045CDN












































































































































































































































































































































































































































































































Результаты поиска

Содержание DCP-9045CDN

Отзывы:

Бренды по названию

Популярные бренды

Brother DCP-9045CDN, Руководство по обслуживанию

Результаты поиска

Содержание DCP-9045CDN

Отзывы:

Бренды по названию

Популярные бренды