Brother BAS-300G-484, Инструкция по эксплуатации

Страница: 69 / 88

10. STANDARD ADJUSTMENTS
BAS-300G-484, BAS-300G-484 SF 60
7. While pressing the key (10), turn on the power switch.
* After the model name is displayed, keep pressing the
key (10) until the buzzer sounds.
The check code will appear in the PROGRAM No.
display (11), and the abbreviation for the output name
will appear in the menu display (12).
8. Press the key (13) or the key (10) to select check
code 77.
* Refer to the Service Manual for details on other check
codes.
9. Press the key (14) to turn on the thread trimming air
cylinder (15).
* If you press the key (16), the thread trimming air
cylinder (15) will turn off.
10. While the thread trimmer air cylinder (15) is turned on, slide the thread trimmer air cylinder (15) in the direction of the
arrow so that the thread trimmer plate (17) and thread trimmer lever H (18) are touching, and then tighten the four bolts
(5).
11. Loosen the nut (6) once more, and then turn the set screw (9) a further 1/4 of a turn in the counterclockwise direction.
12. Tighten the nut (6), and then check that the collar (7) is not touching the inside of the groove in the thread trimmer cam
(8). In addition, push the driving lever (19) by hand toward the thread trimmer cam (8) until the collar (7) is within the
groove of the thread trimmer cam (8), and then check that the driving lever (19) returns smoothly to its original position
when it is released.
13. Turn off the power switch.
4697M
4698M