Brother 882-T51, Руководство по эксплуатации

Страница: 57 / 192

EMBROIDERING TUTORIAL
55
2
■
Continuing embroidering
To select a new pattern, touch .
→
The pattern type selection screen appears.
Stopping embroidering
The machine can be stopped during embroidering.
■
Temporarily pausing
a
Press the “Start/Stop” button.
→
The machine stops and the “Start/Stop” button lights
up in red.
• The thread is not trimmed.
• To continue embroidering, after checking that the
upper thread is taut, touch the unlock key, and then
press the “Start/Stop” button.
■
Resume embroidering after the
machine was turned off
a
Press the “Start/Stop” button.
→
The embroidery machine stops and the “Start/Stop”
button lights up in red.
• The thread is not trimmed.
b
Touch to unlock the
embroidery machine.
c
Press the thread trimming button.
→
The bobbin and upper threads are trimmed.
• Before turning off the embroidery machine, be sure to
trim the threads.
Note
• The embroidering speed can be changed,
even while the pattern is being
embroidered. (Refer to “Maximum
Embroidering Speed Setting” on page 99.)