Brother 882-T51 Скачать руководство пользователя страница 178

Страница: 178 / 192

176

Nothing happens,

even if the LCD

display is pressed.

The screen has been locked.

Touch

to unlock the

screen.

p. 54

The LCD screen is

fogged up.

Condensation has formed on the LCD

screen.

After a while, the cloudiness will

disappear.

LED pointer does not

indicate the position

correctly.

With thick or elastic fabric, the position

will be misaligned only at raised parts

in the fabric.

Manually adjust the position according

to the thickness of the fabric.

p. 83

With fabric having a very uneven

surface, the position is not correctly

aligned.

The pointer indication should be used

only as a reference.

CAUTION

• This machine is equipped with a thread detecting mechanism. If the machine is not threaded with the

upper thread, the machine will not operate correctly, even if the “Start/Stop” button is pressed after
unlocking the machine.

• If the machine suddenly stops:

• Turn off the machine, and unplug the power cord.
• Restart the machine with the correct operating procedure. Refer to page 28.

Symptom

Probable Cause

Remedy

Reference Page

Содержание 882-T51

































































































































































































Результаты поиска

Содержание 882-T51

Отзывы:

Похожие инструкции для 882-T51

Бренды по названию

Популярные бренды

Brother 882-T51, Руководство по эксплуатации

Результаты поиска

Содержание 882-T51

Отзывы:

Похожие инструкции для 882-T51

Бренды по названию

Популярные бренды