Brother 882-T51, Руководство по эксплуатации

Страница: 184 / 192

182
If the machine does not respond
when a key is pressed
If nothing happens when a key on the screen is
touched (no key can be selected or the keys are
misaligned), adjust the touch panel as described
below.
a
Touch anywhere inside the touch panel,
and turn the machine off, then on again.
• Continue touching the touch panel until the screen
shown below appears.
• The “Start/Stop” button is red.
→
The adjustments screen appears.
b
Use the included touch pen to touch the
center of the numbered crosses on the
screen, from 1 to 5.
→
AD Value X and AD Value Y numbers change with
the touch of each numbered cross to show variables.
• If the buzzer sounds when cross number 5 is touched,
an error occurred during setting, and “ERROR”
appears on the screen. Touch the crosses again,
starting from 1 to 5.
c
After making the necessary touch panel
adjustment, “SUCCESS” will show on the
screen.
d
Turn the machine off, and on again.
CAUTION
• Be sure to use the included touch pen to adjust
the touch panel. Do not use a mechanical
pencil, screwdriver or any other hard or sharp
object. Do not apply pressure to the LCD
screen display, otherwise damage to the
display may result.
+1 +4
+2
+5
+3
Note
• If the keys still do not respond, even after
the touch panel is adjusted, or if the touch
panel cannot be adjusted, contact your
nearest authorized Brother dealer.