36
Serial Interface UCT-32/34
Message Displays/Operator Panels
Export:
Tel:
+45 46 74 00 00
Fax:
+45 46 75 73 36
E-mail: [email protected]
United Kingdom:
Tel:
+44 (0) 20 8546 4283
Fax:
+44 (0) 20 8547 3628
E-mail: [email protected]
Germany:
Tel:
+49 0208 46954-0
Fax:
+49 0208 46954-50
E-mail: [email protected]
ACOUSTIC FEEDBACK
KEY=1 TEXT=1
Use the <P> (UCT-32) or <C> (UCT-34) key to
move the cursor between the (KEY) and (TEXT)
selector.
Use the <
!
!
!
!
!
>/<
"
"
"
"
"
> keys to toggle the setting on/
off.
Save the settings by pressing <S> and the dis-
play-intensity menu reappears.
When the edition is completed, disconnect supply
voltage to the display and resume operation by
setting switch no. 0 off:
fig. 8
Switch no. 0: Off, Operation.
Supply voltage may be connected again.
NOTES/REMARKS
1) The keypad editor is only enabled when no
keyboard is connected to the display.
4 Editing Set-up from the Keypad.
The set-up of display-intensity, real-time clock
and acoustic alert can be edited from the front of
the message display via the keypad.
Enter front set-up by disconnecting supply vol-
tage and setting the code switch:
fig. 7
Switch no. 0: On, Programming.
Switch no. 1: Off, Front set-up
1)
.
Connect supply voltage and the display shows:
LIGHT LEVEL % 4
1=20 2=40 3=60 4=100
Use the <
!
!
!
!
!
>/<
"
"
"
"
"
> keys to change the display-
intensity. The display-intensity follows the adjust-
ment at the cursor, enabling you to find the re-
quired setting.
Save the adjustment and exit the menu by press-
ing <S> and the display shows:
YY-MM-DD HH:MM WD
93-02-20 11:35 -4
Use the <P> (UCT-32) or <C> (UCT-34) key to
move the cursor between the digits.
Use the <
!
!
!
!
!
>/<
"
"
"
"
"
> keys to in- or decrease a set-
ting.
Save the settings and exit the menu by pressing
<S> and the display shows:
Code/Address
0 1 2 3 4 5 6 7 8 9
ON
OFF
Code/Address
0 1 2 3 4 5 6 7 8 9
ON
OFF