manualshive.com logo in svg

Brocade Communications Systems ICX 7250 series, Руководство по настройке

Поделиться
Скачать
Brocade Communications Systems ICX 7250 series Скачать руководство пользователя страница 80

To disable forwarding for an application, enter a command such as the following.

device(config)# no ip forward-protocol udp ntp

This command disables forwarding of SNMP requests to the helper addresses configured on Layer 3 switch interfaces.

Configuring an IP helper address

To forward a client broadcast request for a UDP application when the client and server are on different networks, you must configure a
helper address on the interface connected to the client. Specify the server IP address or the subnet directed broadcast address of the IP
subnet the server is in as the helper address.

You can configure up to 16 helper addresses on each interface. You can configure a helper address on an Ethernet port or a virtual
interface.

To configure a helper address on unit 1, slot 1, port 2, enter the following commands.

device(config)# interface ethernet 1/1/2

device(config-if-1/1/2)# ip helper-address 1 10.95.7.6

The commands in this example change the CLI to the configuration level for port 1/1/2, then add a helper address for server 10.95.7.6
to the port. If the port receives a client request for any of the applications that the Layer 3 switch is enabled to forward, the Layer 3 switch
forwards the client request to the server.

By default, IP helper does not forward client broadcast request to a server within the network.

To forward a client broadcast request when the client and server are on the same network, configure an IP helper with unicast option on
the interface connected to the client.

To configure an IP helper unicast option on unit 1, slot 1, port 2, enter the following commands:

device(config)# interface 1/1/2

device(config-if-1/1/2)# ip helper-address 1 10.10.10.1 unicast

The IP helper with unicast parameter forwards the client request to the server 10.10.10.1 which is within the network.

Syntax:

 

ip helper-address

 

num

 

ip-addr

 

[unicast]

The 

num

 variable specifies the helper address number and can be from 1 through 16.

The 

ip-addr

 variable specifies the server IP address or the subnet directed broadcast address of the IP subnet the server is in.

The 

unicast

 parameter specifies that the client request must be forwarded to the server that is on the same network.

Configuring IP parameters - Layer 2 switches

The following sections describe how to configure IP parameters on a Brocade Layer 2 switch.

Configuring the management IP address and specifying the default

gateway

To manage a Layer 2 switch using Telnet or Secure Shell (SSH) CLI connections or the Web Management Interface, you must configure
an IP address for the Layer 2 switch. Optionally, you also can specify the default gateway.

Configuring IP parameters - Layer 2 switches

Brocade FastIron Layer 3 Routing Configuration Guide

80

53-1003903-04

Содержание ICX 7250 series




































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды