manualshive.com logo in svg

Brocade Communications Systems ICX 7250 series, Руководство по настройке

Поделиться
Скачать
Brocade Communications Systems ICX 7250 series Скачать руководство пользователя страница 353

not enabled, the status field displays only the default letter "E", as displayed for BGP4 route 10.12.0.0/24. The letter "B" or "b" is missing
from the Status field.

NOTE

The description of the status "b: NOT-INSTALLED-BEST" has changed. The status description for "b: NOT-INSTALLED-
BEST" is now: The routes received from the neighbor are the best BGP4 routes to their destinations, but were nonetheless not
installed in the IP route table due to the 

rib-route-limit

 option (or RTM route table size limit), and the 

always-propagate

 option

to allow the propagating of those best BGP routes.

NOTE

Traffic loss on a BGP4 route occurs when a device is advertising preferred BGP4 routes not installed in the RTM as part of the
forwarding path.

Because the BGP4 route 10.12.0.0/24 is not considered as the best BGP4 route, the route is not advertised to other BGP4 neighbors.

device(config-bgp)# show ip bgp route 10.12.0.0/24

Number of BGP Routes matching display condition : 1

Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED

       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH

       S:SUPPRESSED F:FILTERED s:STALE

       Prefix          Next Hop       MED    LocPrf   Weight Status

1      10.12.0.0/24    10.100.100.4          100      0      E     

         AS_PATH: 48 1994 65148 21948 6461 1239 4837 4808 17431 18245

       Last update to IP routing table: 0h16m2s

       No path is selected as BEST route

Syntax:

 

show

 

ip

 

bgp

 

route

 

ip-address

/

prefix

After enabling the 

always-propagate

 command, the BGP4 route is now considered the best BGP4 route, even though the route is not

installed in the RTM. Because the 

rib-route-limit

 command was configured to allow for only 300,000 routes in the RTM some preferred

BGP4 routes are not installed in the RTM, and are not advertised to other BGP4 neighbors. By enabling the 

always-propagate

command, the device is now able to advertise those preferred BGP4 routes to other BGP4 neighbors. In the following example, the
Status field displays "bE" indicating that the route is now considered the best BGP4 route for forwarding and will be advertised to other
BGP4 neighbors.

device(config-bgp)# show ip bgp route 10.12.0.0/24

Number of BGP Routes matching display condition : 1

Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED

       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH

       S:SUPPRESSED F:FILTERED s:STALE

       Prefix          Next Hop       MED     LocPrf    Weight Status

1      10.12.0.0/24    10.100.100.4           100       0      bE    

         AS_PATH: 48 1994 65148 21948 6461 1239 4837 4808 17431 18245

       Last update to IP routing table: 0h12m53s

       Route is to be sent to 1 peers:

        10.0.0.14(6)                        

For an explanation of the fields displayed in the output of the 

show ip bgp route

 command, refer to 

Displaying information for a specific

route

 on page 376.

Specifying a maximum AS path length

You can use the 

maxas-limit in 

command to configure a device running BGP4 to discard routes that exceed a specified AS path limit.

This limit can be configured globally, for peer groups, and for BGP neighbors.

Specifying a maximum AS path length

Brocade FastIron Layer 3 Routing Configuration Guide

53-1003903-04

353

Содержание ICX 7250 series




































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды