Brocade Communications Systems ICX 7250 series, Руководство по настройке

Страница: 111 / 483

TABLE 14 CLI display of interface IP configuration information (continued)
Field Description
have not saved the configuration, the entry for the interface in the Method
field is "manual".
Status The link status of the interface. If you have disabled the interface with the
disable command, the entry in the Status field will be "administratively
down". Otherwise, the entry in the Status field will be either "up" or "down".
Protocol Whether the interface can provide two-way communication. If the IP
address is configured, and the link status of the interface is up, the entry in
the protocol field will be "up". Otherwise the entry in the protocol field will
be "down".
To display detailed IP information for a specific interface, enter a command such as the following.
device# show ip interface ve 1
Interface Ve 1
members: ethe 1/1/4 to 1/1/24 ethe 1/1/27 to 1/1/48 ethe 1/2/1 to 1/2/2 ethe 2/1/1 to 2/1/2
ethe 2/1/4 to 2/1/12 ethe 2/1/15 to 2/1/24 ethe 2/2/1 to 2/2/2 ethe 3/1/1 to 3/1/2 ethe 3/1/4 to 3/1/12
ethe 3/1/14 to 3/1/24 ethe 3/2/3 to 3/2/4 ethe 4/1/1 to 4/1/12 ethe 4/1/15 to 4/1/24 ethe 4/2/3 to 4/2/4
ethe 5/1/1 to 5/1/12 ethe 5/1/14 to 5/1/24 ethe 5/2/3
active: ethe 4/2/4
port enabled
port state: UP
ip address: 66.66.66.66 subnet mask: 255.255.255.0
Port belongs to VRF: default-vrf
encapsulation: ETHERNET, mtu: 9216, metric: 1
directed-broadcast-forwarding: disabled
ICMP redirect: enabled
proxy-arp: disabled
ip arp-age: 10 minutes
No Helper Addresses are configured.
No inbound ip access-list is set
No outgoing ip access-list is set
Displaying ARP entries
You can display the ARP cache and the static ARP table. The ARP cache contains entries for devices attached to the Layer 3 switch. The
static ARP table contains the user-configured ARP entries. An entry in the static ARP table enters the ARP cache when the entry
interface comes up.
The tables require separate display commands or Web management options.
Displaying the ARP cache
To display the contents of the ARP cache, enter the following command at any CLI level.
Brocade# show arp
Total number of ARP entries: 70
Entries in default routing instance:
No. IP Address MAC Address Type Age Port Status
1 10.63.61.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
2 10.63.53.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
3 10.63.45.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
4 10.63.37.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
5 10.63.29.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
6 10.63.21.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
7 10.63.13.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
8 10.63.0.1 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
9 10.63.5.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
10 10.63.62.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
11 10.63.54.2 000c.000c.000c Dynamic 0 1/1/16-1/1/17 Valid
--More--
Displaying IP configuration information and statistics
Brocade FastIron Layer 3 Routing Configuration Guide
53-1003903-04 111