manualshive.com logo in svg

Brocade Communications Systems ICX 7250 series, Руководство по настройке

Поделиться
Скачать
Brocade Communications Systems ICX 7250 series Скачать руководство пользователя страница 241

Changing default settings

Refer to the FastIron 

Command Reference

 for other commands you can use to change default OSPF settings. Some commonly

configured items include the following:

•

Changing reference bandwidth to change interface costs by using the 

auto-cost reference-bandwidth 

command.

•

Defining redistribution filters for the Autonomous System Boundary Router (ASBR) by using the 

redistribute 

command.

Disabling and re-enabling OSPFv2 event logging

OSPFv2 event logging can be configured, disabled, and re-enabled.

1. Enter the 

configure terminal

 command to access global configuration mode.

device# configure terminal

2. Enter the 

router ospf

 command to enter OSPF router configuration mode and enable OSPFv2 globally.

device(config)# router ospf

3. Enter the 

no log all

 command to disable the logging of all OSPFv2 events.

device(config-ospf-router)# no log all

The following example re-enables the logging of all OSPFv2 events.

device# configure terminal

device(config)# router ospf 

device(config-ospf-router)# log all

Disabling OSPFv2 on the device

Understanding the effects of disabling OSPFv2

Consider the following before disabling OSPFv2 on a device:

•

If you disable OSPFv2, the device removes all the configuration information for the disabled protocol from the running
configuration. Moreover, when you save the configuration to the startup configuration file after disabling one of these protocols,
all the configuration information for the disabled protocol is removed from the startup configuration file.

•

If you have disabled the protocol but have not yet saved the configuration to the startup configuration file and reloaded the
software, you can restore the configuration information by re-entering the 

router ospf 

command, or by selecting the Web

management option to enable the protocol. If you have already saved the configuration to the startup configuration file and
reloaded the software, the information is gone.

•

If you are testing an OSPFv2 configuration and are likely to disable and re-enable the protocol, you might want to make a
backup copy of the startup configuration file containing the protocol’s configuration information. This way, if you remove the
configuration information by saving the configuration after disabling the protocol, you can restore the configuration by copying
the backup copy of the startup configuration file into the flash memory.

Configuring OSPFv2

Brocade FastIron Layer 3 Routing Configuration Guide

53-1003903-04

241

Содержание ICX 7250 series




































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды