manualshive.com logo in svg

Brocade Communications Systems ICX 7250 series, Руководство по настройке

Поделиться
Скачать
Brocade Communications Systems ICX 7250 series Скачать руководство пользователя страница 478

3. Confirm the modified values.

device(config)# show default values

sys log buffers:50         mac age time:300 sec       telnet sessions:5

ip arp age:10 min          bootp relay max hops:4     ip ttl:64 hops

ip addr per intf:24

              :

              :

System Parameters    Default    Maximum    Current    Configured

ip-arp               4000       64000      4000       4000

ip-static-arp        512        6000       512        512

pim-mcache           1024       4096       1024       1024

              :

              :

ip-route             12000      15168      12000      12000

ip-static-route      64         2048       64         64

              :

              :

ip-vrf               16         16         16         16

ip-route-default-vrf 12000      15168      10000      10000

ip6-route            5120       5120       5120       5120      

ip6-route-default-vr 5120       5120       5120       5120      

ip6-route-vrf        100        5120       100        100  

device(config)#

Creating VLANs as links on a tagged port for security

Where Multi-VRF is used, for example, in an enterprise data center, trusted servers or devices should be allowed to communicate
directly, and untrusted ones should not be allowed to communicate directly at all. This optional task configures tagged Layer 3 interfaces
to support secure VRF instances.

1. In global configuration mode, create a VLAN.

device(config)# vlan 10

device(config-vlan-10)# 

2. Use the 

tagged

 command to identify the interface as secure.

device(config-vlan-10)# tagged e 1/1/1

3. Repeat the previous step on the corresponding interface on the peer device.

Configuring a VRF instance

Do the following to configure a VRF instance.

A device can be configured with more than one VRF instance. You should define each VRF instance before assigning the VRF to a Layer
3 interface. The range of the instance name is from 1 through 255 alphanumeric characters. Each VRF instance is identified by a unique
Route Distinguisher (RD), which is prepended to the address being advertised. Because the RD provides overlapping client address
space with a unique identifier, the same IP address can be used for different VRFs without conflict. The RD can be an AS number,
followed by a colon (:) and a unique arbitrary number as shown below. Alternatively, it can be a local IP address followed by a colon (:) and
a unique arbitrary number, as in "1.1.1.1:100." An optional router ID can also be assigned.

Use the 

address-family

 command in VRF configuration mode to specify an IPv4 or IPv6 address family. For a specific address family

you can also configure static route, static ARP, IGMP, and multicast for IPv4, and static route, IPv6 neighbor, and multicast for IPv6.

Configuring Multi-VRF

Brocade FastIron Layer 3 Routing Configuration Guide

478

53-1003903-04

Содержание ICX 7250 series




































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды