manualshive.com logo in svg

Brocade Communications Systems ICX 7250-24, Руководство по установке оборудования, Страница: 23 / 98

Поделиться
Скачать
Brocade Communications Systems ICX 7250-24 Скачать руководство пользователя страница 23

Installation

● 

Items included with the ICX 7250 device........................................................................ 23

● 

Configuration requirements.............................................................................................24

● 

Summary of installation tasks......................................................................................... 24

● 

Installation precautions................................................................................................... 24

● 

Preparing the installation site.......................................................................................... 26

● 

Installing the device.........................................................................................................26

● 

Connecting devices in a traditional stack........................................................................ 31

● 

Powering on the system..................................................................................................33

DANGER
The procedures in this manual are for qualified service personnel.

DANGER
Before beginning the installation, see the precautions in “Power precautions.”

CAUTION
Disassembling any part of the power supply and fan assembly voids the warranty and regulatory
certifications. There are no user-serviceable parts inside the power supply and fan assembly.

Items included with the ICX 7250 device

ICX 7250 devices ship with all of the following items included in your shipping container. Verify the
contents of your shipping container. If any items are missing, contact the place of purchase.

• ICX 7250 device
• Rack mounting kit containing two L-shaped mounting brackets and two sets of eight sink-head

screws

• Wall mounting kit containing two wall-mount screws and two plastic anchors
• Two-post rack kit containing four rack-mounting screws and four cage nuts
• One AC power cord (US only)
• Power cord retainer clip
• Console cable
• DB9 adapter
• Four rubber feet
• China ROHS sheet
• Read Me First document

Brocade ICX 7250 Switch Hardware Installation Guide

23

53-1003622-02

Содержание ICX 7250-24



































































































Отзывы:

Нет отзывов