Console management interface
The console management interface is a mini-USB port that allows you to configure and manage the
device using a third-party terminal emulation application from a directly connected PC or through a
terminal server.
Out-of-band management interface
The out-of-band management interface is an RJ-45 port that allows you to access, configure and
manage the device from the network.
System reset button
The reset button allows you to restart the system without switching the power supply off and on, using
the CLI. When the reset button is pressed, the system resets and the software is reloaded. The button
is accessible through a hole labeled RESET in the front panel.
Network interfaces for devices
The devices contain the following network interfaces.
• 10/100/1000 Mbps ports with RJ-45 copper connectors
• SFP or SFP+ ports
SFP ports support 1 Gbps port speed. SFP+ ports support both 1 Gbps and 10 Gbps port speeds.
NOTE
Brocade ICX 7250 Switch Technical Specifications
on page 73 to see the ports supported
by your model.
Slot designations
Refer to
Network and management interfaces
on page 14 for the location of slot 1 and slot 2 on the
front panel of the 24-port models and the 48-port models.
Slot designations for ICX 7250 devices
TABLE 3
Device
Slot 1 (10/100/1000 BASE-T ports)
Slot 2 (SFP and SFP+ ports)
ICX 7250-24G
RJ-45 ports 1-24
SFP ports 1-4
ICX 7250-24
RJ-45 ports 1-24
SFP+ ports 1-8
ICX 7250-24P
RJ-45, PoE/PoE+ ports 1-24
SFP+ ports 1-8
ICX 7250-48
RJ-45 ports 1-48
SFP+ ports 1-8
ICX 7250-48P
RJ-45, PoE/PoE+ ports 1-48
SFP+ ports 1-8
Console management interface
Brocade ICX 7250 Switch Hardware Installation Guide
15
53-1003622-02