manualshive.com logo in svg

Brocade Communications Systems ICX 7250-24, Руководство по установке оборудования, Страница: 45 / 98

Поделиться
Скачать
Brocade Communications Systems ICX 7250-24 Скачать руководство пользователя страница 45

1. Rack-mounting screws
2. Cage nuts

5. If installing multiple external power supplies, mount them in the rack one above the other.

Installing an RPS17 Power Supply Unit (PSU)

You can install a new RPS17 PSU into EPS4000 while the device is powered on and running.

NOTE

While installing a PSU, wear an ESD wrist strap.

DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.

Perform the following steps to install an RPS17 PSU.

1. Put on the ESD wrist strap and ground yourself by attaching the clip end to a metal surface (such as

an equipment rack) to act as ground.

2. Remove the four screws that hold the PSU-slot cover in place. Refer to the following figure.

FIGURE 25

 Installing an RPS17 PSU

1. RPS17 PSU slots (3 populated, 1 available)
2. Screws

NOTE

You will have to uninstall an RPS17 PSU, if you are replacing one as part of the installation. Refer to 

Uninstalling an RPS17 Power Supply Unit (PSU)

 on page 46.

3. Remove the new PSU from the protective packaging.
4. Gently insert the PSU into the slot until it clicks into place.

Installing an RPS17 Power Supply Unit (PSU)

Brocade ICX 7250 Switch Hardware Installation Guide

45

53-1003622-02

Содержание ICX 7250-24



































































































Отзывы:

Нет отзывов