Configuration requirements
To manage the ICX 7250, you need a management station, such as a PC running a terminal
emulation application, for serial connection to the device.
Use the serial connection to perform basic configuration tasks, including assigning an IP address and
network mask to the system. This information is required to manage the system using the CLI through
Telnet or Brocade Network Advisor.
Summary of installation tasks
Follow the steps in the following table to install your device. Details for each of these steps are
provided on the pages indicated.
Installation tasks
TABLE 8
Task number Task
Where to find more information
1
Ensure that the physical environment that will host the
device has the proper cabling and ventilation.
Preparing the installation site
on page
26
2
Unpack the device and all included accessories.
Items included with the ICX 7250 device
on page 23
3
Install the device on a desktop, or in an equipment
rack.
on page 26
4
Once the device is installed, plug the device into a
nearby power source that adheres to the regulatory
requirements outlined in this manual.
on page 33
Installation precautions
Follow all precautions when installing a device.
General precautions
DANGER
All fiber-optic interfaces use Class 1 lasers.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 50°C (122°F).
Configuration requirements
24
Brocade ICX 7250 Switch Hardware Installation Guide
53-1003622-02