manualshive.com logo in svg

Broadcast DPS ES-2200, Руководство оператора

Поделиться
Скачать
Broadcast DPS ES-2200 Скачать руководство пользователя страница 69

68

Warranty Service

Units requiring repair under warranty may be sent directly to Digital Processing Systems, Inc. To obtain service under
this warranty, first contact the Digital Processing Systems Customer Service Department to request a Return Material
Authorization (RMA) Number.

•

 

Canada and International

 

(Country code) 905.944.4000

•

 

USA

(Country code) 859.371.5533

•

 

Europe

 

+44 1252 (outside the UK) or 01252 (inside the UK)  followed by 718300

•

 

Asia - Pacific Rim

61.2.9547.0088

The RMA number must be clearly displayed on the unit’s external packaging. Units shipped without this number will
not be accepted. Include proof of purchase (including date of purchase), a note outlining the problem and the RMA
number.

IMPORTANT:

 When shipping your unit, pack it securely and ship prepaid and insured. Digital

Processing Systems, Inc., will not be held liable for damage or loss to the product in shipment.
Repaired items will be returned to the purchaser prepaid via a surface freight carrier of DPS’ choice
(within the continental United States). If another method of shipping is desired, it must be clearly
specified in writing and all priority return freight charges are the responsibility of the purchaser.

Содержание DPS ES-2200







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды