Broadcast DPS ES-2200, Руководство оператора

Страница: 33 / 70

32
RS-2800 Personal Routing Switcher
Routing Switcher commands are not on the ES-2200T front panel. A stick-on label is provided with each switcher card.
This label should be applied to the front panel underneath the proc amp controls.
The ES-2200S can be configured to control one or two switcher cards. The Routing Switcher card has a four by one
(4x1) switching matrix accessible through the four input BNC connectors at the rear of the card. The Routing switcher
card also has an eight by one (8x1) switching matrix accessible through the Edge connector. When the Personal
Routing Switcher card is used in the ES-2200S, the 8x1 matrix can’t be accessed and therefore can’t be used. The 4x1
matrix can be controlled by the front panel as indicated by the label.
IN-1
When selected, the Personal Routing Switcher routes the video source on input #1 to the output BNC.
IN-2
When selected, the Personal Routing Switcher routes the video source on input #2 to the output BNC.
IN-3
When selected, the Personal Routing Switcher routes the video source on input #3 to the output BNC.
IN-4
When selected, the Personal Routing Switcher routes the video source on input #4 to the output BNC.
PROC AMP
IN-1 IN-2 IN-3 IN-4
STORE RECALL PREVIOUS UNITY
CLAMP IN LOCK BLK CLP HOT SW
Place Sticker Here