Broadcast DPS ES-2200, Руководство оператора

Страница: 5 / 70

4
Introduction
DPS ES-2200 General Description
The DPS ES-2200 is a 2-slot expansion system intended to accommodate any combination of up to two DPS Personal
Series or MicroSYNC plug-in cards. The functions of the DPS Personal Series cards installed in the system can be
operated by the front panel control or by software using the rear panel RS-232 connector.
There are two versions of the ES-2200. The ES-2200T is intended for TBC cards. Its front panel is marked according
to operations specific to TBCs. The ES-2200S is intended for DPS MicroSYNC cards. Its front panel is marked
according to operations specific to MicroSYNC cards. It is possible to install a MicroSYNC and a TBC card into the
ES-2200T. However, the front panel will not be marked for operations specific to the card that was not intended for the
unit.
With the exception of MicroSYNC and TBC cards, any of the cards listed on the following page may be installed into
either the ES-2200S or the ES-2200T. If you are installing the cards yourself follow the procedure that begins on page
8, paying careful attention to DIP Switch positions.
The Operations section of this manual is divided into two sections. Chapter 3 is the ES-2200T operations section. If
you have purchased the ES-2200T, you should only read Chapter 2. Similarly, Chapter 3 is the ES-2200S operations
section. You should read this chapter if you have purchased the ES-2200S.