Brixton BX125, Руководство по обслуживанию

Страница: 54 / 148

53
Visually inspect whether the shock absorber is damaged.
The inspection items include:
——
whether the shock absorber cylinder is bent or damaged
——
whether the shock absorber is subject to deformation or oil leakage
——
whether the rubber block is worn or damaged
——
whether the spring is damaged
Inspect whether the rest parts are damaged or worn
If necessary, replace the shock absorber
4.4.3 Installation
Installation must be initiated in the reverse sequence of removal.
Mount the upper fixing nut and lower mounting bolt on the rear shock absorber.
Lock to the specified torque value.
Torque value:
Upper fixing nut: 35-45N·m
Lowe fixing nut: 35-45N·m
4.5
Rear swing arm
4.5.1 Disassemble the rear
swing arm
Disassemble the chain guard plate
Disassemble the chain tensioning wheel and the rear axle shaft
Disassemble the rear wheel and the rear shock absorber
Disassemble the rear swing arm installation shaft
Take down the weld assembly of the rear swing arm
4.5.2 Inspection of rear swing arm
Check the mounting shaft of rear swing arm and turn
the shaft or measure it with a micrometer gauge after
it is placed onto a flat surface. If the shaft is bent,
replace it.
KS MOTORCYCLES - http://ksmotorcycles.com