Britax Steelcraft STRIDER PLUS Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 48

background image

38

WARNINGS:

s

The Second Seat cannot be used in conjunction with the Bassinet.

s

The Second Seat must only be used with a SC or Steelcraft Stroller with compatible

attachments.

s

Second Seat to be used only in a forward facing position. That is connected to the rear of
the Stroller and facing towards the Stroller.

s

The Second Seat must be correctly fitted and locked onto the Stroller.

s

Use only for a child weighing up to 15kgs.

s !FIVEPOINTHARNESSISPROVIDEDTORESTRAINYOURCHILD4OSECURETHECHILDINTHEHARNESS

push buckles (A) through the buckle rings (B) and into the buckle housing (C) until the
buckle prongs snap into position. Carefully adjust the harness by pulling the sliders (D)
until the desired fit is achieved in the lap, shoulder and crotch straps. Always adjust the
harness when changing the seating position of the child. To release the buckle, squeeze
the top and bottom buckle prongs (A). Refer to section 18.

Recommended Stroller seat position when
used in conjunction with the Second Seat.

DO NOT install the Stroller seat in a
rearward facing position when used in
conjunction with the Second Seat.

SECOND SEAT ASSEMBLY & OPERATION

31. TO USE THE SECOND SEAT

«
...
36
37
38
39
40
...
»

Содержание Steelcraft STRIDER PLUS

















































Отзывы:

Нет отзывов

Похожие инструкции для Steelcraft STRIDER PLUS

Бренд: Babybee Prams Страницы: 21

Бренд: RadioMaster Страницы: 10

Бренд: Maclaren Страницы: 15

Бренд: Maclaren Страницы: 9

Бренд: Maclaren Страницы: 40

Cutler-Hammer Jockey

Бренд: Eaton Страницы: 12

Бренд: Cardin Elettronica Страницы: 56

Бренд: Riello Страницы: 72

Бренд: Zencontrol Страницы: 2

Бренд: Daikin Страницы: 2

Бренд: Advantech Страницы: 3

Бренд: JANE Страницы: 76

Бренд: OLYS Страницы: 4

The Boost Box WS 1107

Бренд: Watersports Innovations Страницы: 12

Бренд: Parker Страницы: 31

Бренд: Chicco Страницы: 18

Бренд: Stramatel Страницы: 10

Бренд: KELCO Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды