Britax Steelcraft STRIDER PLUS Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 48

background image

4

BASSINET WARNINGS:

s !LWAYSREMOVEYOURCHILDFROMTHE"ASSINETBEFOREFITTINGORREMOVINGFROM3TROLLER
s 4HE"ASSINETMUSTBEREMOVEDFROMTHEFRAMEBEFOREFOLDING
s $ONOTLIFT3TROLLERBYTHE"ASSINET/NLYUSE3TRIDER"ASSINETWITHTHE3TRIDER0LUS

Stroller. Use a harness once the baby can sit up unaided.

INFANT CARRIER WARNINGS:

s $ONOTLEAVETHECHILDINTHECARRIERFOREXTENDEDPERIODS
s 4HECARRIERISDESIGNEDTOPROVIDEMOBILITYOUTSIDEOFTHECARBUTITSHOULDNOTBE

used instead of an appropriate cot.

s %NSURETHECARRIERMUSTBECORRECTLYFITTEDANDLOCKEDINTOTHE3TROLLER
s 4HE)NFANT#ARRIERMUSTONLYBEUSEDWITHAN3#OR3TEELCRAFT3TROLLERWITHCOMPATIBLE

attachments.

s 4OBEUSEDONLYINAREARWARDFACINGPOSITIONTHATISFACINGTOWARDTHE3TROLLERHANDLE
s 5SEONLYFORACHILDWEIGHINGUPTOKGSANDWITHALENGTHOFUPTOMM
s 2EMOVE)NFANT#ARRIERFROM3TROLLERFRAMEBEFOREFOLDING
s !LWAYSSECUREYOURCHILDWITHTHEHARNESSPROVIDED

SECOND SEAT WARNINGS:

s

The Second Seat cannot be used in conjunction with the Bassinet

s

The Second Seat must only be used with a SC or Steelcraft Stroller with compatible

attachments.

s

Second Seat to be used only in a forward facing position. That is connected to the rear of

the Stroller and facing towards the Stroller.

s

The Second Seat must be correctly fitted and locked onto the Stroller.

s

Use only for a child weighing up to 15kgs.

s !FIVEPOINTHARNESSISPROVIDEDTORESTRAINYOURCHILD4OSECURETHECHILDINTHE

harness, push buckles (A) through the buckle rings (B) and into the buckle housing (C)
until the buckle prongs snap into position. Carefully adjust the harness by pulling the
sliders (D) until the desired fit is achieved in the lap, shoulder and crotch straps. Always
adjust the harness when changing the seating position of the child. To release the
buckle, squeeze the top and bottom buckle prongs (A).

WARNINGS

«
...
2
3
4
5
6
...
»

Содержание Steelcraft STRIDER PLUS

















































Отзывы:

Нет отзывов

Похожие инструкции для Steelcraft STRIDER PLUS

Бренд: S&C Страницы: 8

Бренд: YASKAWA Страницы: 340

Бренд: Brooks Страницы: 66

Driver VISIO IoT

Бренд: Sulion Страницы: 8

Бренд: Sentiotec Страницы: 92

Бренд: Parker Страницы: 64

TWRF1 SCR Series

Бренд: Metek Страницы: 36

Бренд: Tyco Страницы: 32

Бренд: Dukane Страницы: 30

Tacosol Load EXA L

Бренд: Taconova Страницы: 40

Бренд: Harsen Страницы: 55

Бренд: Wabtec Страницы: 5

Бренд: Walchem Страницы: 43

Бренд: M-system Страницы: 8

Бренд: S&S Northern Страницы: 8

Giatsu GIA-J105

Бренд: GIA Страницы: 9

WB-150-IPW-1B-2

Бренд: watt box Страницы: 12

Бренд: Danfoss Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды