Britax Steelcraft STRIDER PLUS Скачать руководство пользователя страница 44

Страница: 44 / 48

31. TO USE THE SECOND SEAT - CONTINUED

31.8 To remove Second Seat from the frame

WARNING:

Remove the child from the Second Seat before attempting to fold.

Now push the Second

Seat up in the direction
indicated by the arrow,
so the Second Seat
connecting pins (SS2) lift
out of the frame mouldings
(S29).

First, fold the Second

Seat up under the frame -
see item 31.7.

With the Second Seat

in the folded position,
locate the two grey release
buttons (S30) on the sides
of the frame.

Hold the sides of the

Second Seat with each
hand. Simultaneously
press in and hold both
grey release buttons, at the
same time lifting the seat
up away from the Stroller
frame.

SECOND SEAT ASSEMBLY & OPERATION

S30

Lift the second seat out

and away from the frame.

SS2

S29

S30

Содержание Steelcraft STRIDER PLUS

















































Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды

Britax Steelcraft STRIDER PLUS, Руководство пользователя

Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды