Britax Steelcraft STRIDER PLUS Скачать руководство пользователя страница 43

Страница: 43 / 48

31. TO USE THE SECOND SEAT - CONTINUED

31.7 To fold the Second Seat while attached to the frame

WARNING:

Remove the child from the Second Seat before attempting to fold

NOTE: Fold the Second Seat before folding the Stroller.

Continue to lower the

Second Seat, the foot end
of the Second Seat will
slide up the frame to the
folded position.

The Second Seat is

shown in the fully folded
position above. To fold the
Stroller frame see section
30. You may need to
adjust the pivot handle if it
interferes with the frame.

While still holding the

backrest adjusting lever up,
slide the grey safety lock
button (SS5) up, then lower
the head end of the Second
Seat.

Fold the canopy

back, then fully lift up the
backrest adjusting lever and
hold in this position.

At the same time,

push down on the Second
Seat, the foot end of the
Second Seat slide will slide
up and stop at the safety
lock position (lowest recline
position).

The image above

shows the Second Seat
at the safety lock position
(lowest recline position).

SECOND SEAT ASSEMBLY & OPERATION

SS5

Содержание Steelcraft STRIDER PLUS

















































Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды

Britax Steelcraft STRIDER PLUS, Руководство пользователя

Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды