Britax Steelcraft STRIDER PLUS Скачать руководство пользователя страница 45

Страница: 45 / 48

31. TO USE THE SECOND SEAT - CONTINUED

31.9 To use the adaptors with the Stroller seat

NOTE: Adaptors are supplied to create more space if required, when using the Second Seat.

For correct connection to the Stroller frame, the adaptors move the Stroller seat mounting closer
to the front of the Stroller.

DO NOT install the Stroller seat in a rearward facing position when used in conjunction with the
Second Seat.

Lock the Stroller seat

into the adaptors in the
forward facing position.

WARNING: Stroller seat
must be correctly attached,
see fitting and removal
sections 11 & 14.

Adjust the Stroller

backrest angle as required.

SECOND SEAT ASSEMBLY & OPERATION

Pull up on the adaptors

to make sure they are
locked on.

Press down on the

adaptors to lock into the
Stroller frame mouldings
(S9).

Align the adaptor with

the Stroller frame mouldings
as shown, and ensure the
adaptor extends towards
the front of the Stroller and
the ribbed section of the
mouldings face inwards.

Содержание Steelcraft STRIDER PLUS

















































Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды

Britax Steelcraft STRIDER PLUS, Руководство пользователя

Результаты поиска

Содержание Steelcraft STRIDER PLUS

Отзывы:

Похожие инструкции для Steelcraft STRIDER PLUS

Бренды по названию

Популярные бренды