Instructions for Installation & Use
- Series No. JS8A/2010
HOW TO INSTALL
37
Remove SLIDEGUARD™
converter from recess area and
engage into harness buckle.
Lap part of seatbelt
in recess area
(behind armrests).
Hook the Lap Belt
SLIDEGUARD™
converter over the
lap belt with the Red
button (of the buckle)
facing forward.
E
Rolled up towel
under the base
Rolled up towel
at the back
E.
Position the lap-sash belt over the child ensuring
the lap portion is positioned into the lap recess area
under the armrest and on the child's thighs. The
seatbelt should follow the red Seatbelt path labels
marked -BOOSTER SEATBELT PATH
Fit the SLIDEGUARD™ Converter to the lap belt as
shown below. The SLIDEGUARD™ Converter must
be used at all times in Booster mode, to position
the lap belt on the child's thighs and prevent your
child from submarining in the event of an impact. If
the lap belt is not on the child's thighs then shorten
the length of the crotch strap, see page 34-35.
F.
Engage seatbelt buckle and tongue ensuring there
are no twists in the belt. If the seatbelt buckle is
adjustable, adjust the buckle as low as possible
away from the child.
IMPORTANT:
A SASH BELT UNDER THE ARM OR
BEHIND THE BACK IS DANGEROUS.
NOTE:
Some car seats have more rearward
slope than others. Use a rolled up towel or
padding under the seat for contoured vehicle
seats to prevent excessive recline.
Click
BOOSTER MODE
WITH VEHICLE SEATBEL
T
