Instructions for Installation & Use
- Series No. JS8A/2010
28
HOW TO SETUP
STORING THE HARNESS
A.
Disengage harness buckle. Fully lengthen the harness by pressing
the harness adjustment lever and pulling the harness shoulder
straps.
B.
At the rear of the restraint, remove both of the harness shoulder
straps from metal strap connector by slipping strap through open
slot. The metal strap connector is shown in diagram right.
C.
Pull the shoulder straps through slots in the seat back.
D.
Remove the elastic loops holding the cover in place at the lower
front of the seat. Lift the cover to expose the storage inserts in the
seat base.
E.
Feed the straps with harness buckle tongues through the bottom
rear of the seat cover. Roll up the harness straps with harness
buckle tongue and place them into the left and right rear recess in
the seat base (underneath the cover).
A
E
B
Strap Connector
BOOSTER MODE
WITH VEHICLE SEATBEL
T
