background image

Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this 

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all 

the warnings and safety guidelines before use. This product is for use with the VALCO Latitude stroller in North 

American only. This product is not intended for use in Australia.  

Important: Please read the following instructions carefully before assembling this product. Retain this 

guide in a safe place for future reference. 

PRODUCT REFERENCE GUIDE

© Copyright VE 2008

Due to our policy of continuous 

product development, this 

product is constantly evolving. It 

is possible that some features or 

procedures outlined here have 

changed since this document 

was written. If you are unsure 

of any procedure shown here, 

please contact us via the web at 

[email protected] to obtain 

the most up to date information 

before use. Include the batch 

number, which can be found on a 

sticker on the frame.

All pictures and diagrams herein 

are provided for illustration 

purposes only. Actual product, 

colour or fabric may vary. VALCO 

reserves the right to modify or 

alter any specification or colour 

without notice or obligation to 

modify any product previously 

purchased

FURTHER INFORMATION

North America only

www.valcobaby.com

1800 610 7850

Twin Latitude Car 

Seat Adapter

 

Compatible with most Maxi Cosi Car Seats

Содержание Twin Latitude Car Seat Adapter

Страница 1: ...f continuous product development this product is constantly evolving It is possible that some features or procedures outlined here have changed since this document was written If you are unsure of any procedure shown here please contact us via the web at info valcobaby com to obtain the most up to date information before use Include the batch number which can be found on a sticker on the frame All...

Страница 2: ...d rods so they are aligned with the corresponding connector pieces on the stroller frame where the twin hood was connected 1 5 Simultaneously slide the hood rods onto the corresponding raised pieces of the stroller frame and lock into place 2 6 Snap the hood snaps onto the corresponding snap pieces on the stroller seat back FIGURE C 7 The Male and Female straps are intended to secure the car seat ...

Страница 3: ...bar and in the stroller seat TIP YOU MAY WANT TO ADJUST THE FRONT BUMPER BAR AND SEAT RECLINE FOR A MOST SECURE FIT FIGURE G 15 Once car seat is secured turn stroller so you are facing the car seat front 16 Locate the Maxi Cosi strap as pictured in FIGURE A FIGURE H 17 Locate the inner front bar of the car seat 18 Wrap the strap around the bar in an UNDER OVER UNDER motion until tightly wrapped ar...

Страница 4: ...s Female counterpart and buckle 19 Adjust straps to tighten around car seat To remove your car Seat 20 Reverse the steps outlined in Figure I and lift out the car seat I WARNINGS Always follow car seat manufacturer s instructions when using the car seat Be sure to check that all straps are securely fixed and in place before use Check all parts for breakage or fatigue before use Discontinue immedia...

Отзывы: