Britax MARATHON CLASSIC, Руководство пользователя

Страница: 20 / 48

18
Installation: Rear-Facing
Lap-Shoulder Belt Installation
• Figure A illustrates a rear-facing, lap-shoulder
belt installation.
• When not in use, always store the LATCH
connectors in the storage slots. See page 33.
1 Recline the child seat then place it rear-facing
on the vehicle seat.
This child seat must be in
the recline position when installed rear-facing.
See Recline Adjustment on page 33
.
2 Lift the cover to open the rear-facing lock-off
farthest from where the vehicle belt will be
buckled (Fig. B).
3 Pull the vehicle belt out, then pass it under the
LATCH bar and through the rear-facing belt
slot (Fig. C).
• The vehicle belt can be routed over or under
the cover.
4 Route the vehicle belt across seat then
through the opposite rear-facing belt slot and
under the LATCH bar.
IMPORTANT: The vehicle belt must rest behind the
child seat buckle strap.
5 Verify that the vehicle belt is not twisted, then
buckle (Fig. D).
6 Push the child seat firmly into the vehicle seat
while removing slack first from the lap portion
of the vehicle belt, then the shoulder portion
(Fig. E).
A
b
C
d