Britax MARATHON CLASSIC Скачать руководство пользователя страница 41

Страница: 41 / 48

Care and Maintenance

Cleaning the Cover

• HAND WASH using cold water and mild soap.

• LINE or LIE-FLAT DRY to prevent the cover from shrinking.

• DO NOT

bleach, machine wash, machine dry or iron.

Cleaning the Shell

• SPONGE CLEAN using warm water and mild soap.

• TOWEL DRY

• DO NOT

use solvents or abrasive cleaners.

Cleaning the Harness

• SPONGE CLEAN using warm water and mild soap.

• TOWEL DRY

• DO NOT

bleach, machine wash, machine dry or disassemble

the harness.

Cleaning the Harness Adjuster

Periodically check the adjuster area to be sure it is clean and free of

food, drink or other debris. If debris is present, it must be removed to

prevent interference with the adjuster mechanism.

• BRUSH AWAY LOOSE DEBRIS using a soft-bristled brush.

• SPONGE CLEAN using warm water and a mild soap.

• TOWEL DRY

• DO NOT

use solvents, abrasive cleaners or disassemble the

harness.

Содержание MARATHON CLASSIC

















































Результаты поиска

Содержание MARATHON CLASSIC

Отзывы:

Похожие инструкции для MARATHON CLASSIC

Бренды по названию

Популярные бренды

Britax MARATHON CLASSIC, Руководство пользователя

Результаты поиска

Содержание MARATHON CLASSIC

Отзывы:

Похожие инструкции для MARATHON CLASSIC

Бренды по названию

Популярные бренды