Britax MARATHON CLASSIC, Руководство пользователя

Страница: 18 / 48

16
Installation: Rear-Facing
LATCH Installation
• Figure A illustrates a rear-facing LATCH
installation.
• Verify that your vehicle is equipped with LATCH
anchors. If LATCH anchors are not available, you
must use the vehicle belt installation methods.
1 If stored, remove the LATCH connectors from
the storage slots under the cover (page 33)
and pass them through their adjacent belt slots
.
2 Press and hold the first LATCH adjuster
release button, then pull the LATCH strap to
full length. Repeat for the remaining LATCH
connector.
3 Recline the child seat and place rear-facing on
the vehicle seat.
This child seat must be in the
recline position when installed rear-facing. See
Recline Adjustment on page 33.
4 Attach one LATCH connector to its adjacent
vehicle LATCH anchor (Fig. B) in the upright
position (Fig. C).
• An audible click confirms attachment.
• Ensure that the LATCH strap is not twisted.
TIP: You may need to turn the front of the child
seat toward you for easier access to the
vehicle LATCH anchor.
5 Attach the remaining LATCH connector to its
adjacent vehicle LATCH anchor (Fig. D) in the
upright position (Fig. C).
• An audible click confirms attachment.
• Ensure that the LATCH strap is not twisted.
NOTE: If an audible click is not heard when
connecting either LATCH connector, the LATCH
strap may be twisted, or there may be debris in the
LATCH connector. Correct either situation before
continuing with the installation process.
d
A
b
C
Release
button
Top