Britax MARATHON CLASSIC, Руководство пользователя

Страница: 19 / 48

17
Installation: Rear-Facing
6 Align each LATCH strap on the LATCH bar
with the “LATCH Strap Here Rear-Facing”
label on each side of the child seat. (Figs. E
and F).
7 Push the child seat firmly into the vehicle seat
while pulling each LATCH strap tight (Fig. G).
IMPORTANT: Ensure the LATCH strap does not fold
into the LATCH adjuster while tightening.
8 Verify that all connections are secure, the
LATCH strap is aligned to the “LATCH Strap
Here Rear-Facing” label on each side of the
child seat, and that the child seat is stable.
• The child seat is secure when it cannot be moved
more than 1 in. (2.5 cm) front-to-back or side-to-
side at the belt path. If the child seat is not secure,
repeat the installation process or use an alternate
seating location.
• When properly installed in the rear-facing position,
the back angle of the child seat should be 30º – 45º
from vertical (not to exceed 45º) when the car is
parked on a level surface (Fig. H).
• If necessary, the proper recline angle can be
achieved by placing a rolled towel or pool noodle in
the vehicle seat bight to level the child seat’s base.
G
F
e
h
WARNING! Do not raise the child
seat off the front edge of the vehicle seat.
This could cause your child seat not to
perform as intended.
• Rear-facing installation can be improved by the use
of the Versa-Tether. See pages 29 – 32.