36
37
CARE & MAINTENANCE
TO REPLACE THE COVER
A.
Place the cover over the infant carrier
ensuring all slots in cover line up with slots in
infant carrier.
B.
Ensure that there are no twists in all straps
underneath the Infant Carrier.
C.
Feed the shoulder harness straps through lap
strap slots in cover.
D.
Feed the shoulder harness straps through
the shoulder strap slots in cover and then in
through the Infant Carrier. Refer to page 16
for correct shoulder harness position for your
baby. Attach the shoulder harness straps to
the strap connector.
E.
Feed the crotch buckle as well as the harness
adjuster strap through the slots in the cover.
F.
Refit plastic hooks on cover to Infant Carrier as
shown right.
G.
Engage shoulder harness tongues and crotch
buckle. Pull to check harness is attached.
H.
Ensure the straps are not twisted.
Metal Strap Connector
Plastic Hooks
Pull elastic cover over
Infant Carrier
CARE & MAINTENANCE
COVER (style may vary)
The cover has been designed to protect your child when seated in the restraint. Care
should be taken if children either eat or drink while in the restraint as some products
may cause damage or marking to the cover.
VERY IMPORTANT:
Only use this child restraint with the cover supplied
or a manufacturer-authorised replacement cover
with identical shoulder height markers.
IMPORTANT:
Do not pull sticky items from covers as the cover may be damaged - soak in
water and gently remove. The seat cover and accessories must not be replaced
with any other than the one recommended by Safe-n-Sound, because the cover
is an integral part of the child restraint and how it performs. The child restraint
must not be used without the cover and the padding provided.
