18
19
Metal Strap Connector
HOW TO SET-UP
HOW TO SET-UP
ADJUSTING THE
SHOULDER HARNESS
A.
At the rear of the Infant Carrier, remove one of
the harness shoulder straps from metal Strap
Connector by slipping strap through open
slot. The Metal Strap Connector is shown in
diagram right.
B.
Pull the shoulder strap through slot.
C.
Insert the shoulder strap through the Infant
Carrier slot which will position the shoulder
strap level with or above the baby’s shoulder
(see page 16). Ensure that the shoulder strap
passes through matching slots in the cover
and seat shell.
If a Padded Insert is used then that will need
to be re-positioned and the strap re-inserted
when changing the slot position.
D.
Ensure there are no twists in the straps.
E.
Connect it to the Metal Strap Connector at rear
of Infant Carrier.
F.
Repeat for the other shoulder strap. It is better
to change one strap at a time so that the other
strap will be a guide for re-assembly.
FOR SMALL BABY
FOR GROWING BABY
FOR LARGER BABY
Do not use the carrier with the harness
shoulder straps set at different heights or
fed through mismatching slots. Ensure
the harness straps are not twisted and
that all straps are secured by pulling
each harness strap.
IMPORTANT :
