REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A.
Check the webbing for fraying.
B.
Ensure the inside of the buckle is free of foreign matter, food or feeding liquids.
Check that the buckle clicks and is not sluggish or sticky in operation. If sluggish,
wash the buckle as shown on page 38.
C.
Ensure there are no cracks in moulding or the plastic moulding.
D.
Check the harness adjuster is operating and is clamping the webbing.
E.
If any part of the Infant Carrier is cracked or broken, seek repair immediately or
replace the Infant Carrier.
F.
Check that the Infant Carrier catch retains the Infant Carrier to the base. Check
screws and rivets are firmly in place. If not seek repair.
CLEANING
Use only mild soap and water with a damp cloth to clean all straps, metal and plastic
parts of the restraint. Do not use chemicals or cleaning agents.
CARE & MAINTENANCE
CARE & MAINTENANCE
COVER
For baby’s comfort and health the Infant Carrier cover is removable for cleaning.
Cleaning instructions are on the care label attached to the liner. Washing the cover
prior to use will remove excess fluff and dye’s.
TO REMOVE THE COVER
A.
Remove the Canopy and Baby insert pad (if
supplied) as described on page 14. Unclip the
two infant carrier cover straps which are secured
by plastic hooks under the handle attachment
point.
B.
Disconnect the shoulder harness straps from the
Metal Strap Connector and feed through shoulder
slots in both infant carrier and cover. Refer to
page 18.
C.
Feed the shoulder harness straps and tongues
through lap strap slots in the Cover only. There is
no need to remove the harness straps from the
Infant Carrier.
D.
Lift the cover around the rim of the infant carrier
at the harness adjuster end, feed the crotch
buckle through the slot in cover and pull the
harness adjuster strap out of the slots.
E.
Remove the cover for cleaning.
Pull cover off
from the corners
Unhook clips on either
side of cover under the
handle then remove cover
34
35
