Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage
points and the possible use of spacers. Some vehicles may have an anchor fitting
fitted by the vehicle manufacturer. If anchorage points cannot be found refer to car
manufacturer or local child restraint fitting station or traffic authority for optimum
position of anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in
one way. Please refer to vehicle owner’s handbook or a child restraint fitting station
for correct method.
INSTALLATION OF CAR ANCHOR FITTING
51
50
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
ANCHOR FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS
CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR
FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS
IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS,
HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE
ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
HOW TO REMOVE THE BRITAX STROLLER ADAPTOR
If you need to remove the Britax Stroller Adaptor ensure trim is moved aside and
handle is in rocking position. First unscrew the Press Pin half way and pull out. Pull
out locking clip and gently remove the adaptor from away from carry handle. Store
for future use.
C
TO RELEASE INFANT CARRIER FROM STROLLER
A.
Squeeze both handle latches in to
release the locks.
B.
Rotate the handle forward, towards
the carry position.
C.
Once in the carry position lift and
remove the Infant Carrier away
from the stroller frame.
Use the harness at all times.
A
TRAVEL SYSTEM - BRITAX ADAPTORS
Unlock