Brita BPF89CATCB100TOC, Руководство по установке

Страница: 41 / 48

NSF/ANSI STANDARD 42 AESTHETIC EFFECTS
MODEL NUMBER: BPF89CB75TO BPF89CB100TO BPF89CB150TO BPF89CB200TO BPF89CB300TO
Flow Rate (GPM): 4.6 5.2 7.2 10.2 14.0
Capacity (Gallons): 50,000 66,000 100,000 133,000 200,000
Working Pressure: 20 - 125 psig
Operating Temperature: 34 - 100 F
Pressure Drop: 7.0 PSI
Reduction Claim: Chlorine, Taste & Odor
Influent Challenge Conc.: 2.0 mg/L
Reduction Requirement >/=50%
Actual Minimum Percent
Reduction:
95.88%
Actual Average Percent
Reduction:
98.26%
This filtration system has been tested and certified according to NSF/ANSI Standard 42 by IAPMO for the
reduction of the substances listed below, as verified and substantiated by test data. The concentration of the
indicated substances in the water entering the system was reduced to a concentration less than or equal
to the permissible limit for the water leaving the system, as specified in NSF/ANSI Standard 42. Please see
warranty for manufacturer’s limited warranty. Please see installation instructions for internal operation and
maintenance requirements.
PERFORMANCE DATA STATEMENT
This system has been tested according to NSF/ANSI 42 for reduction of the substances listed above.
This concentration of the indicated substances in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42.
Please Note: While testing was performed under standard laboratory conditions, actual performance may vary.
Laboratory test conditions: pH: 6.5-8.5, water temperature: 72°F / 23°C - 75°F / 24°C
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
Certified by IAPMO R&T to
NSF/ANSI 42 for Chlorine,
Taste and Odor Reduction.
41