Brita BPF89CATCB100TOC, Руководство по установке

Страница: 4 / 48

4
You must read and understand the contents of this manual
before installing or operating your water softener. Personal injury
or property damage could result if you fail to follow instructions in
this manual.
This system and its installation must comply with state and
local regulations. Check with your local public works department
for plumbing and sanitation codes. Local codes should be
followed In the event the codes conflict with any content in this
manual.
For installations in Massachusetts, Massachusetts Plumbing
Code 248 CMR shall be adhered to. Consult your licensed plumber
for installation of this system.
This water softener must be operated on pressures
between 30 psi to 125 psi. If the water pressure is higher than 125
PSI, use a pressure reducing valve in the water supply line to the
softener.
This unit must be operated at temperatures between 40°F and
110°F (4°C - 43°C).
Do not use this water softener on hot water supplies.
Do not install this unit where it may be exposed to wet
weather, direct sunlight, or temperatures outside of the
range specified above.
Apply provided NSF certified lubricant to all o-rings during
installation. Do not use pinched or damaged o-rings during
installation.
Softeners are exposed to high levels of iron, manganese,
sulfur, and sediments. Damage to pistons, seals, and or spacers
within the control valve are not covered in this warranty due to the
harsh environment.
It is recommended to annually inspect and service the control
valve. Frequent cleaning and or replacement of piston, seals,
and or spacers may be necessary depending on how harsh the
conditions are. An Annual Maintenance kit (Part # 60010307) is
available for this purpose.
Do not use water that is microbiologically unsafe without
adequate disinfection before or after this system.
This publication is based on information available when
approved for printing. Continuing design refinement could
cause changes that may not be included in this publication.
See page 8 for unpack and inspect system
BRITA
®
PRO reserves the right to change the specifications
referred to in this literature at any time, without prior notice.
INSTALL
NOTES &
SAFETY
MESSAGES
Watch for the
following messages
in this manual:
CAUTION
EXAMPLE:
Disassembly while under pressure
can result in flooding.
READ THIS
PAGE FIRST
BEFORE STARTING INSTALLATION
WARNING
ELECTRICAL SHOCK HAZARD! Unplug the unit before removing
the cover or accessing any internal control parts
EXAMPLE:
EXAMPLE:
Check and comply with
your state and local
codes. You must follow
these guidelines.
NOTE