Brita BPF89CATCB100TOC, Руководство по установке

Страница: 20 / 48

20
1. CONNECT THE TRANSFORMER TO THE VALVE.
Plug the 12-volt transformer into a 120 VAC 60 Hz outlet.
2. ADD WATER TO BRINE TANK
Open the brine tank lid and add 3 gallons of water. Do not
add salt to the brine tank at this time.
STARTUP PROCEDURES
Manually Regenerate the Valve and move it
to backwash position. Press
Menu Key and
Scroll down using Up and Down Arrow buttons
to “Manual Regen”. Press “SET” Select “Regen Now”
4. SET THE VALUE TO MANUALLY REGENERATE
If screen is locked, press Menu Key for 5 seconds to unlock.
OPERATION
3. SCREEN DISPLAY
When power is supplied to the
control, the screen will display
“INITIALIZING WAIT PLEASE”
while it finds the service position.
MENU
SET
System initializing
Please wait
FAMILIARIZE WITH BUTTON
CONFIGURATION:
MENU
SET
MENU
SET
This function accepts the values if
changed and advance to the next
page in the menu
MENU
SET
MENU
SET
These buttons increase or decrease
the value of the settings while in the
programming mode.
This function enters the basic set
up information required at the
time of installation.
KEY PAD CONFIGURATION
MENU
SET
Date and Time
18-Apr-2016 10:35AM
Gal Remain 1400
Flow Rate 3 gpm/min
The controller will show the
following on the screen: Time,
Date and Gallons Remaining for
Regeneration
Date and Time
Hardness
Manual Regen.
Dealer Information
Main Menu
Regen. Now?
Regen. Tonight?
Press To Cancel
Press „ To Confirm
Brine Drawing
Any Key 3s To Next
13:59
18%
18%
Backwashing
Any Key 3S to Next
Rinsing
Any Key 3S to Next
Skip this cycle by
pressing any key for 3
seconds
Complete
the Backwashing cycle to
let the air out of the
system
Complete this cycle to
settle the media
Brine Refill
Any Key 3S to Next
Complete this cycle to let
the air out of the injector
system
18%
18%
175/225/27
5
salt grid system
918(36.2
")
salt tank body
salt tank lid
(7.3")
(20.35")
1028
186
(40.5")
517
175/
225/275
brine well and brine valve
salt grid system
585(
23"
)
BTR 200l label
Power
Connector