Brita BPF89CATCB100TOC, Руководство по установке

Страница: 17 / 48

17
Unplug the riser tube, carefully position the valve over it and turn the valve into the threads
in the fiberglass tank, tightening securely into tank. Note: Ensure that the internal O-ring in
the valve fits securely over the riser tube. Silicone grease (part # 92360) or other food grade
lubricant may be applied to the O-ring to ease installation of the riser tube.
2. MEDIA INSTALLATION
NOTE
Some medias like those used in NU
Models are sacrificial and deplete faster
depending on inlet water conditions and
usage. The media replenishment is more
frequent in high water usage and more
acidic water cases. The dome hole models
are available and supplied in which the
dome hole is available for a quick addition
or replenishment of media in the tank.
MULTI MEDIA
FILTER (MMF)
MEDIA BED
Anthrafilt /
Anthracite
(Black)
Fine Sand
Support Bed
(when supplied)
Fine, Medium
and/or Coarse
Gravel
Fine Garnet
(Purple)
Coarse Garnet
(Purple)
BIRM FILTER
(BM) MEDIA
BED
Birm
(Black)
Support Bed
(when supplied)
Fine, Medium
and/or Coarse
Gravel
MULTI MEDIA FILTER
(MM OR NEXSAND)
MEDIA BED
Nexsand
(Black)
Support Bed
(when supplied)
Fine, Medium
and/or Coarse
Gravel
ACTIVATED
CARBON FILTER
(ACF) MEDIA
BED
Carbon
(Black)
Support Bed
(when supplied)
Fine, Medium
and/or Coarse
Gravel
Calcium
Carbonate &
Magnesium Oxide
Mixed
(Grey / White)
NEUTRALIZING
FILTER (NF)
MEDIA BED
Support Bed
(when supplied)
Fine, Medium
and/or Coarse
Gravel
D)
Fill tank one quarter full of water
to protect distribution during gravel
installation.
Place the media into the tank in the
order indicated above. Slowly and
carefully add the gravel support bed
and the filtration media leveling each
layer as it is placed into the tank.
Fill support bed (if supplied) first.
During the filling process, ensure the
distributor tube stays on the bottom of
the tank, reasonably centered. Remove
the tape from the distributor once
media is loaded. Whenever possible,
fill the tank outdoors to avoid problems
with dust. If filling indoors, a dust mask
should be worn.
Grease port O-rings using brush
(not included) or your finger
(Make sure to wear protective
gloves)
D-Tube
Unscrew Spill Cap
Attach
Upper
Basket