2
INSTALLATION
Detach the package, lift and install the machine in
accordance with the following instruction.
It will damage the machine or endanger the
safety of the operator.
Detach the original package of the machine
according to the package position pointed.
The choice of the installation site of the machine
must comply with the current safety regulation.
Especially, the installation and operation of the
machine
must
have
the
protective
to
moisture-resistance.
IMPORTANT: Correct and safe use of the
machine, the min. luminosity of the machine must
be at least 300lux
The use condition requirement:
- RH
:
30%
—80% (without co0ndensation);
- Temperature range:0°
—+55°C.
The floor to fix the machine if solid enough to
support the max. load of the machine.
The machine cannot be used in the exploded
environment.
The package of the machine is separate package
and the assembly will be in accordance to the
following methods described.
Electrical connect
Any electrical connect to the machine will be only
executes by the qualified personnel and should
be in accordance with the current regulation.
Any electrical connect should be in accordance
with :
• power on the nameplate of the machine;
• Voltage drop will not exceed 4% of the rated
voltage specified on the nameplate when full load.
It is 10% when start up.
-User must:
• Install the plug
:
Connect the plug with the
corresponding specification according to the
voltage label and ensure the power source
parameter is the same.
• Electrical connect to the machine
:
Install the
suitable electrical current circuit breaker.
• Install power cable fuse.
• Provide the effective workshop electrical
installation.
• Avoid the prohibited machine operation. Pull out
the power plug to extend the life of the machine
when the machine is not in use or it is in the state
of switch off.
- If the machine directly connected with the power
source through the power board. It should be
operated by the qualified person if without using
the plug.
Perfect earth is necessary for the correct
operation of the machine. Do not connect the
earth with the pipe line, water pipe, telephone
cable and the other improper objects.
Содержание CB460 Series
