Printed in USA © 2015
7
Document # 2102861 RevA
Brewer
FLEX
Access
Exam Table
11. Press lift up on the foot
control to raise the seat
approxim
ately 1” (Figure 7).
To aid in preventing injury or product damage please observe the following cautions when removing the table from the pallet.
INSTALLATION (continued)
Figure 8. DO NOT Lift by Upholstery
Figure 7. Raise Seat off of Brace
DO NOT LIFT
BY STIRRUPS!
(If Equipped)
Use Leg
Support
Lifting Hazard
The table weighs approximat
ely 315
lbs. Use enough
personnel to remove the table from the shipping pallet.
Use proper lifting techniques. Failure to do so could
result in serious injury.
WARNING
Avoid Stirrup Damage
Do not lift or move table by using the stirrups as a hand hold.
Lifting or moving table by stirrups can damage the internal
indexer housing unit (Figure 10).
NOTICE
Avoid Pelvic Tilt and Upholstery Damage
Do not lift or move table by pulling up on the seat upholstery
(figure 8). Lifting by the seat will damage the pelvic tilt
mechanism (if equipped) and may damage the upholstery.
NOTICE
Figure 10. DO NOT lift by Stirrups
Figure 9. DO NOT Push on Backrest
Avoid Backrest Actuator and Upholstery Damage
Never push forward on the backrest to move table.
Pushing on the backrest will cause backrest actuator
damage and may cause upholstery damage (figure 9).
NOTICE
STOP
RETURN
TO CHAIR
1”
25mm
Or