Printed in USA © 2015
19
Document # 2102861 RevA
Brewer
FLEX
Access
Exam Table
TABLE ADJUSTMENTS (continued)
Caution: Maximum Total Load 3A
Manual Pelvic Tilt
(Models 5701 and 5801)
The manual pelvic tilt feature sets the seat angle at 0°
(horizontal) or 5° (up) position.
Pull up on the front of the seat and the pelvic tilt
automatically travels to the locked tilt position (Figure 38).
Figure 38. Pelvic Tilt Adjustment
Pelvic Tilt Adjustment Bar
Outlet
(Models 5701 and 5801)
Drawer Warmer
(Models 5701
and 5801)
Front Drawer Warmer
(Models 5701 and 5801)
Models 5701 and 5801 are equipped with a drawer
warmer that is turned on by a switch located above the
drawer (Figure 39).
Outlet
(Models 5701 and 5801)
Models 5701 and 5801 are equipped with an
Outlet (Figure 40). The maximum total load that
can be plugged into the outlet is 2 amps.
Figure 39. Front Drawer Warmer Switch
Figure 40. Table Outlet
Lowering the Pelvic Tilt Mechanism
To lower seat, lift the adjustment lever and lower the
seat to the horizontal position. Patient must be removed
from table prior to lowering the pelvic tilt mechanism.
NOTICE
Proper Loading of the Front Drawer
Do not stack instruments in the front drawer. Place
instruments in one layer in the bottom of the drawer.
NOTICE
Engaging the Pelvic Tilt Mechanism
Pulling up with excessive force can damage the pelvic
tilt mechanism. Lift only with enough force to engage
mechanism.
NOTICE
Maximum Outlet Rating
Plugging a device into the outlet on the side of the table
with rating higher than 2 amps may cause the fuse at
the back of the table to blow.
NOTICE